JUKI AMS-210EN

New technologies have helped the AMS Series increase "productivity," achieve "energy conservation" in consideration of the global environment, and further improve "quality."

Specification common to all models

JUKI AMS-210EN automatic pattern sewing machine with a slide-type thread take-up lever is designed for improved stitching with heavy threads tension. JUKI's unique active tension mechanism which has been re-designed specifically for heavy-weight materials, as well as the slide-type thread take-up lever which is suited for sewing heavy-weight materials, increase the maximum tension by 50% more compared to that of the standard models of the JUKI AMS Series machines. The new model improves seam quality (thread tension) for sewing seat belts and general heavy-weight materials such as container belts and bags.

JUKI AMS-210EN automatic pattern sewing machine has achieved the industry's highest sewing speed of 2,800sti/min. The maximum sewing speed is reached by the 2nd stitch from the beginning of sewing. Since the sewing machine maintains its highest sewing speed immediately before the end of sewing and instantaneously decreases its speed, cycle time can be substantially decreased.

JUKI's unique stepping-motor controlled thread trimming mechanism is adopted to enable speedy and consistent thread trimming performance.

The machine demonstrates enhanced responsiveness due to the adoption of a main-shaft direct-drive system.

The AMS Series are an economically-efficient model which has been designed to reduce power consumption.

JUKI AMS-210EN automatic pattern sewing machine is an economically-efficient model which has been designed to reduce power consumption. The sewing machine has adopted a direct-drive system by means of a compact AC servomotor that is excellent in energy transmission to drive the main shaft, and has adopted an encoder-control system which drives the stepping motor with a minimum of power in accordance with the material thickness and stitch length to control the X-Y drive mechanism. Power consumption of the new AMS Series is reduced by 30% when compared with JUKI's conventional AMS-210E.

The frame (needle bar unit and thread take-up unit) is lubricated with grease, and the hook is fed with a minute quantity of oil from the oil tank. JUKI's advanced dry technology, which is utilized in a number of our sewing machine models, protects your products from being stained with oil.

The feeding frame comes in two different types; the monolithic feeding frame and the separately-driven feeding frame. The separately-driven feeding frame enables easy placement of the sewing material on the machine since its right and left frame parts can be operated separately. Both the amount of lift and the ascending/descending speed of the feeding frame can be adjusted differently for the right and left parts of the frame.

Market-proven active tension has been introduced to the needle thread tension controller. With the active tension, pinpoint changes in the needle thread tension during sewing are enabled. The needle thread tension, therefore, can be set in conjunction with the material thickness and can be corrected according to the direction of sewing on a stitch-by-stitch basis through the operation panel. Since the needle thread tension is reproducible, supporting a broader range of sewing conditions, the time required for setup changing upon process changeover can be reduced.

The position of the feed can be checked during sewing by means of the encoder-controlled X-Y drive stepping motor. This remarkably improves accuracy of the feed. As a result, deformation of a sewing pattern which is likely to occur when sewing at a high speed or sewing a heavy-weight material is significantly reduced.

To support the sewing of multi-layered parts of materials, the lower dead point height of the intermediate presser can be changed steplessly during sewing (standard: 0-3.5mm; maximum: 0-7.0mm). The intermediate presser will now be able to clamp the material without fail, thereby preventing troubles in sewing, such as stitch skipping and thread breakage. Furthermore, flaws on the sewing product are prevented by maintaining the intermediate height as desired according to the material thickness. (The intermediate presser stroke is adjustable between 0 and 10mm.)

JUKI AMS-210EN automatic pattern sewing machine can be used for free pattern stitching, parts sewing, reinforcement stitching, etc.

Examples of applications include the attaching of labels, emblems and name labels, the attaching of Velcro, various shape-tacking, and special bartacking.

Programmable Electronic Pattern Sewing Machine, Automatic pattern sewing machine, Industrial programmable pattern sewing machine, Programmable automatic pattern sewing machines

Juki single needle lockstitch sewing machine, Juki double needle sewing machine, Juki overlock sewing machine, Juki coverstitch machine, Juki chainstitch machine, Juki zigzag sewing machine, Juki heavy duty sewing machine, Juki automatic sewing machine, Juki button machine, Juki bartack machine, Juki button hole machine, Juki Programmable Pattern Sewing Machine

Hot Tags: juki ams-210en, China, suppliers, manufacturers, factory, wholesale, buy, discount, pricelist, quotation, low price, in stock