What are the precautions for a zigzag sewing machine?

Now machine-based operations in factories and companies have become very common, the machine is not life, but it brings a lot of help to our lives and also makes our standard of living a step closer, so whether it is the leadership or employees, we should also take more care when using the machine, so that the machine's service life will be prolonged, and the efficiency of the work will be greatly improved, so about the zigzag sewing machine precautions are What are they?

◆The correct operation and adjustment of the active thread-cutting system 
1. Now we use the bending sewing machine, and computerized sewing machine, there is active thread-cutting equipment, but also has to operate correctly in order to achieve satisfactory results. To determine whether the threading of the bottom line of the face is correct, the line of the face of the line over the line of the system has two upper and lower clamps, the effect of which the top of the small clamps is to regulate the length of the face of the line thread if the clamps are too loose, the thread left will be too long, too tight it will be too short and easy to take off the line of the bottom line of the adjustment should not be too loose, too loose, then it will cause the active thread cutting after the end of the phenomenon of the normal sewing is not on the line.
2. At the end of the sewing active thread cutting, but also with the knee control pressure angle with a good, should not lift the pressure angle too fast, too fast simple thread breakage incomplete, the onset of needle breakage phenomenon.

◆Zigzag sewing machine needle installation
1. In the normal sewing process, the installation of the needle is very important. Different fabrics should also choose different types of machine needles. When installing the needle, it must be correct, if it is not correct, it will cause skipping, and thread breakage episodes. Production of the same batch of products, the use of machine needles should also be unified, and can not be mixed with thick and thin, over time, the rotary hook will form damage, causing hook anomalies, thread breakage, and thread skipping episodes.
2. Needle In the long-term use of the process, the tip of the needle will have to be worn, if the needle is not pointed, will cause thread skipping and broken bottom line of the seizure, but also cause fabric breakage, please pay attention.

◆The adjustment of the oil supply system
1. We use a high-speed bending sewing machine, and have active oil supply equipment, in normal use, the rotary hook, upper shaft, lower shaft, needle bar, and other parts have the corresponding oil line and oil pipe, there is no need to deliberately inject oil, usually operate only need to observe the normal amount of oil spray.
2. In the process of using a curved sewing machine and computerized sewing machine, there will be a lot of thread hair and cloth hair in the rotary hook part and oil tank, which must be sorted out in time to avoid clogging the oil circuit, forming unnecessary wear and tear, and shortening the service life of the equipment.
3. Normal use of the equipment will not cause an oil leakage phenomenon, equipment placed for too long, overnight use, should be wiped with waste material, and then operated with a waste cloth, pull out the oil line can.
4. In the hot summer, all parts of the equipment, the amount of oil should be increased, thus reducing the wear and tear of parts to ensure the normal operation of the equipment so that the equipment is in a great state and improves work efficiency.

If you need to purchase a Zigzag sewing machine, you can choose DAPSEW.

you can contact:

Email: evan@dapsew.com

WhatsApp: +8613186027908